TALK TO US

09 526 0096

Status Instruments In-Head & DIN Rail Temperature Transmitters

Status Logo
IN-HEAD & DIN RAIL TEMPERATURE TRANSMITTERS
SEM203P SEM203 P
 
The SEM203P temperature transmitter is an entry level transmitter and the most popular. It accepts Pt100 temperature sensors and converts the sensor output  to a standard industrial (4 to 20) mA transmission signal. Its temperature range can be set by simulating a temperature sensor resistance at the low and high end of scale required, and pushing the button to output 4mA at the low end, and 20 mA at the high end.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)
SEM203TC SEM203 TC
 
The SEM203TC thermocouple temperature transmitter is an entry level transmitter and the most popular. It accepts most common thermocouple sensors and converts the sensor output  to a standard industrial (4 to 20) mA transmission signal. Its temperature range can be set by simulating a thermocouple temperature sensor mV at the low and high end of scale required, and pushing the button to output 4mA at the low end, and 20 mA at the high end.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM310 SEM310
 
Complete with HART Protocol, the SEM310 universal temperature transmitter accepts Pt100, thermocouple, mV and slide wire sensors and can be integrated into systems where the HART protocol is required. The HART communication protocol allows the user to quickly and easily download information or interrogate the device. It is small in size yet has a performance superior to other larger and more expensive transmitters. A sensor referencing facility enables the transmitter to be accurately matched to a particular sensor.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM710 SEM710

The SEM710 is  a new generation head mounted temperature transmitter with a built in temperature display. Ideal for indicating the process value at the point of measurement. It has a universal input that has been designed to accept most common RTD and thermocouple sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM315-USB-web SEM315 - PRODUCT UPGRADE to USB Interface model

The SEM315 is a DIN Rail temperature transmitter with HART Protocol. It accepts RTD, Thermocouple, mV and slide wire sensors. The SEM315 has full HART communications protocol which allows the user to quickly and easily down-load information or interrogate the device enabling simple re-ranging of sensor type and range, easy on site re-calibration and self documentation. Remote configuration on the (4 to 20) mA loop with a hand held communicator or with a PC & HART modem. All the standard HART universal and common usage commands are fully implemented, with other device specific commands that enable access to the enhanced performance parameters of the SEM315.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM1603P SEM1603 P

The SEM1603 P is a programmable DIN rail mounted temperature transmitter which accepts RTD temperature probes and converts their output into the industry standard 4 to 20mA transmission signal. Designed for ease of use, this range is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the current configuration data, and then perform any changes you wish to make to the configuration.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM1603TC SEM1603 TC

The SEM1603 TC is a programmable DIN rail mounted temperature transmitter which accepts thermocouple temperature probes and converts their output into the industry standard 4 to 20mA transmission signal. Designed for ease of use, this range is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the current configuration data, and then perform any changes you wish to make to the configuration.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

SEM1610 SEM1610

The SEM1610 is a programmable DIN rail mounted temperature transmitter which accepts RTD, Thermocouple, mV and passive current signals converts them into the industry standard 4 to 20mA transmission signal. Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1610 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)

ABOUT US

Instrumatics is a supplier of quality field instrumentation, offering a wide range of technology and more than 35 years in the business.
Our dedicated team of experienced engineers are able to specify appropriate instrumentation for given requirements.

READ MORE
 

CERTIFICATION


cert1cert2cert3




facebook
 

CONTACT US

Tel:  09 526 0096
Email: sales@instrumatics.co.nz
Address:
Suite 2, 19 Beasley Ave
Penrose
PO Box 22-671
Otahuhu
Auckland 1640