TALK TO US

09 526 0096

DeltaOhm Portable Water Analysis

DeltaOhm
PORTABLE WATER ANALYSIS
HD2105 HD2105.1 and HD2105.2  Temperature - pH Meters
 
The HD2105.1 and HD2105.2 are portable instruments with a large LCD display. They measure pH and redox potential (ORP) in mV. They measure temperature by using Pt100 or Pt1000 immersion, penetration or contact probes. The electrode calibration can be carried out on one, two or three points and the calibration sequence can be chosen from a list of 13 buffers. The temperature probes are equipped with an automatic recognition module and factory calibration data are stored inside. The HD2105.2 is a datalogger it storing up to 34,000 pH and temperature samples which can be transferred to a PC from the instrument connected via the RS232C and USB 2.0 serial ports. Storing interval, printing and baud rate can be configured by using the menu.Both models are equipped with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer. The Max, Min and Avg function calculate the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufactures logo for detail on this product and similar products)
HD2305 HD2305.0  Portable pH Meter
 
The HD2305.0 is a portable instrument with a large LCD display. It measures the pH and the redox potential (ORP) in mV. It measures the temperature by using Pt100 or Pt1000 immersion, penetration, contact or air probes. The electrode calibration can be carried out on one, two or three points at 4.01pH, 6.86pH and 9.18pH. The temperature probes are equipped with the automatic recognition SICRAM module which contains the factory calibration data stored inside. The Max, Min and Avg function calculate the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)

HD2156 HD2156.1 and HD2156.2   pH Meter, Conductivity Meter and Thermometer
 
The  HD2156.1 and HD2156.2 are portable instruments with a large LCD display. They measure pH, mV, redox potential (ORP), conductivity, liquid resistivity, total dissolved solids (TDS) and salinity using combined 4-ring and 2-ring conductivity/temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration, contact or air probes.The pH electrode calibration, as well as manual, can be carried out on one, two or three points and the calibration sequence can be chosen from a list of 13 buffers. The calibration of the conductivity probe can be performed automatically in one or more of the 147μS/cm, 1413 μS/cm, 12880 μS/cm or 111800 μS/cm solutions. The HD2156.2 is a data logger. It stores up to 20,000 sets of three measurements composed of pH or mV, conductivity or resistivity or TDS or salinity and temperature: these data can be transferred to a PC from the instrument connected via the RS232C or USB 2.0 serial ports. The storing interval, printing, and baud rate can be configured by the menu. Both models are fitted with an RS232C serial port and can transfer the acquired measurements to a PC or to a portable printer in real time. The Max, Min and Avg function calculates the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)

HD2106 HD2106.1 and HD2106.2   Conductivity Meter and Thermometer
 
The HD2106.1 and HD2106.2 are portable instruments with a large LCD display. They measure conductivity, liquid resistivity, total dissolved solids (TDS), and salinity using combined 4-ring and 2-ring conductivity/temperature probes.
Temperature only is measured by Pt100 or Pt1000 immersion, penetration, contact or air probes. The probe calibration can be performed automatically in one or more than one of the 147μS, 1413μS, 12880μS or 111800μS/cm conductivity calibration solutions. The temperature probes are equipped with an automatic recognition module and factory calibration data are stored inside. The HD2106.2 is a data logger. It memorizes up to 36,000 conductivity and temperature samples which can be transferred from the instrument connected to a PC via the RS232C and USB 2.0 serial ports. The storing interval, printing, and baud rate can be configured using the menu. Both models are fitted with
an RS232C serial port and can transfer to a PC the acquired measurements or to a portable printer in real time. The Max, Min and Avg function calculates the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)
HD2306 HD2306.0   Conductivity Meter and Thermometer
 
The HD2306.0 is a portable instrument with a large LCD display. It measures conductivity, liquid resistivity, and total dissolved solids (TDS), using combined 4-ring and 2-ring conductivity/temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration, contact or air probes. The probe calibration can be performed automatically in one or more than one of the 147μS, 1413μS, 12880μS/cm or 111800μS/cm conductivity calibration solutions. The temperature probes are equipped with an automatic recognition module and factory calibration
data are stored inside. The Max, Min and Avg function calculates the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)
HD2109 HD2109.1 and HD2109.2   Dissolved Oxygen and Temperature Meter
 
The HD2109.1 and HD2109.2 are portable instruments with a large LCD display. They measure the concentration (in mg/l) of dissolved Oxygen in liquids, the saturation index (in %) and the temperature using SICRAM combined probes of polarographic and galvanic type with two or three electrodes and integrated temperature sensor. Temperature only is measured by Pt100–SICRAM or direct 4 wire–immersion, penetration, contact or air probes. Thanks to an internal pressure sensor, the instruments automatically compensate for barometric pressure. The instrument anticipates automatic compensation of the Oxygen probe membrane permeability and of the salinity of the liquid being examined. The dissolved Oxygen probe’s quick calibration function guarantees timely correctness of the performed measurements. The dissolved Oxygen and the temperature probes are equipped with an automatic recognition module and factory calibration data are stored inside. The HD2109.2 is a datalogger. It stores up to 18,000 dissolved Oxygen concentration, saturation index measurements, barometric pressure and temperature samples which can be transferred from the instrument connected to a PC via the RS232C and USB 2.0 serial ports. The storing interval, printing, and baud rate can be configured using the menu. Both models are fitted with an RS232C serial port and can transfer to a PC the acquired measurements or to a portable printer in real time. The Max, Min and Avg function calculates the maximum, minimum or average values.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)
HD98569 HD98569   Multi-Parameter Meter -  pH, Conductivity, DO and Temperature
 
The HD 98569 is a portable multi-parameter data logger for electrochemical measures: pH, conductivity, dissolved oxygen and temperature. It is fitted with a large back-lighted LCD display. The instrument measures: pH, mV, redox potential (ORP) with pH, redox or combined pH/temperature electrodes complete with SICRAM module. Conductivity, resistivity in liquids, total dissolved solids (TDS), and salinity with combined 4-ring and 2-ring conductivity and temperature probes with SICRAM module. Concentration of DO in liquids (in mg/l), saturation index (in %) using SICRAM combined probes of polarographic type with two or three electrodes or galvanic type, with integrated temperature sensor. The instrument is fitted with input for the measurement of temperature with Pt100 immersion, penetration, contact or air probes with SICRAM module. The pH electrode calibration can be out to up to 5 points and the calibration sequence can be chosen from a list of 8 buffers. Temperature compensation can be automatic or manual. The condutivity probe calibration can be performed with automatically detected conductivity calibration solutions: 147μS/cm, 1413μS/cm, 12880μS/cm, 111800μS/cm or manually with calibration solutions having different values. The dissolved oxygen probe's quick calibration function ensures long term accuracy of the performed measurements. pH, conductivity, DO and temperature probes fitted with SICRAM module store the factory calibration. The HD 98569 is a data logger, it stores up to 200 single screens (labels) and up to 9000 samples in continuous storage mode: pH or mV, conductivity or resistivity or TDS or salinity, concentration of dissolved oxygen and saturation index and temperature. The data can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0-1.1.

Downloads:   Data Sheet    (Click on manufacturers logo for detail on this product and similar products)

ABOUT US

Instrumatics is a supplier of quality field instrumentation, offering a wide range of technology and more than 35 years in the business.
Our dedicated team of experienced engineers are able to specify appropriate instrumentation for given requirements.

READ MORE
 

CERTIFICATION


cert1cert2cert3




facebook
 

CONTACT US

Tel:  09 526 0096
Email: sales@instrumatics.co.nz
Address:
Suite 2, 19 Beasley Ave
Penrose
PO Box 22-671
Otahuhu
Auckland 1640