|
|
|
TALK TO US
09 526 0096 |
Isotech Temperature Calibrators
 |
TEMPERATURE CALIBRATORS |
 |
Quick Cal Dry Block Calibrator
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ideal for the medical, sterilisation and food industries. The High Temperature Quick Cal covers the temperature range from 30°C to 350°C. Both have interchangeable inserts, so you don’t have to buy another calibrator each time you find a new diameter sensor to calibrate. The Low Temperature Quick Cal is particularly exciting since it can work from a small 12 volt battery, making it truly portable, alternatively a mains supply is available with 100V - 240V, 50/60Hz input. The Low Temperature Quick Cal comes complete with two inserts, one blank and one drilled 6.8mm diameter 120mm deep. Each calibration well is 13mm diameter and 120mm deep. The High Temperature Quick Cal has a single larger well and interchangeable inserts, 25mm in diameter by 120mm deep. The High Temperature Quick Cal is supplied 100-130 or 200-250V AC, 50/60Hz.
|
 |
Fast-Cal Dry Block Calibrator
The Fast-Cal is rugged, lightweight, Easy to use on site, Low cost/high benefit ratio, Fast response, high stability calibrator. Including time saving features, multiple sensor testing, Software, Modern design and compliant with the latest regulations.
One model is ideal for the validation of Washer Disinfectors, Steam Sterilisers and Autoclaves. In place of a removable insert it has a fixed block with pockets for a reference probe and the type of test sensor commonly used in validation applications. Fast-Cals are available in Basic or Complete models. Downloads: Data Sheet (Click on manufacturers logo for detail on this product and similar products) |
 |
Isocal 6 Range of Industrial Temperature Calibrators
The ISOCAL 6 range of calibrators will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories are available to convert to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers and even to use as an ITS-90 Fixed Point System with calibration uncertainties as small as 0.0005°C. The SITE model includes an independent temperature indicator which, combined with a reference probe, ensures traceability, best practise, adherence to quality standards and calibration to the smallest of uncertainties. A three point traceable calibration certificate is included as standard with all models.
Downloads: Data Sheet (Click on manufacturers logo for detail on this product and similar products) |
 |
ISIS Dry Block Calibrator
The Isis Dry Block offers operation to temperatures as low as -100°C, and is the only block bath working to such a low temperature. Now it is possible to calibrate temperature sensors such as PRTs, Thermocouples and Thermistors at ultra low temperatures without the need for a liquid bath. The minimum operating temperature is less than stirred liquid laboratory calibration baths and users in laboratories will also benefit by avoiding the on going need for expensive fluids. The maximum operating temperature is 40°C, a little higher than the minimum operating temperature of Isotech Hot Blocks. This permits covering the range from -100°C to 650°C or higher with just two Isotech blocks.
|
ABOUT USInstrumatics is a supplier of quality field instrumentation, offering a wide range of technology and more than 35 years in the business.Our dedicated team of experienced engineers are able to specify appropriate instrumentation for given requirements. READ MORE |
CERTIFICATION   
|
CONTACT USTel: 09 526 0096Email: sales@instrumatics.co.nz Address: Suite 2, 19 Beasley Ave Penrose PO Box 22-671 Otahuhu Auckland 1640 |