|
|
 |
|
|
|
|
OUR PARTNERS |
|
|
 |
|
|
|
WHATS NEW |
 |
|
Martel Releases Portable Pressure Calibrator with Integral Electrical Pump!
|
|
 |
|
|
|
|
|
 Multi-Function Calibrators
|
Venus, Europa and Calisto models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories are available to convert to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers. The SITE models includes a nt temperature indicator which, combined with a reference probe, ensures traceability, best practise, adherence to quality standards and calibration to the smallest of uncertainties. A three point traceable calibration certificate is included as standard with all models.
|
The Hyperion calibrates from 45°C below ambient to 140°C and the Drago from 30 to 250°C. The large calibration volume is more than twice the size of alternative products. The useable area is a full 65mm diameter with a depth of 160mm, the overall well depth of 190mm allows room for space at the top and the bottom magnetic stirrer. Stirred liquid baths are suitable for temperature sensors of all types, shapes and sizes. Accuracies are much greater than those from Dry Blocks alone and with suitable reference thermometers performance of up to 0.005°C is achievable.
|
The Oceanus-6 Plus has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 52mm diameter by 300mm deep. The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infra red thermometers, a Surface Sensor Calibrator and for performance to a few mK (0.001ºC) ITS-90 Fixed Points. Available in two models, the basic (B) and the site (S). The B model includes a sophisticated temperature controller with a dual display for Set Temperature and Dry Block Temperature. The S model includes a built in digital thermometer to which an external standard thermometer can be connected.
|
|
|
|
|
|
|
|
|
|
|
